The new Apple MacBook Pro is unsuitable for repair, but has a good cooling system

The new Apple MacBook Pro is unsuitable for repair, but has a good cooling system
Almost immediately after the release of new Apple MacBook Pro laptops equipped with 16-inch screens, experts subjected the devices to comprehensive testing to identify the advantages and disadvantages of the gadget. IFixit experts quickly completed a complete disassembly of the laptop, determining the build quality, design features, main components and maintainability.

The new Apple MacBook Pro is unsuitable for repair, but has a good cooling system
When comparing the cooling systems of the new model with a 15-inch predecessor, enthusiasts noted that the ventilation holes became larger, and the fans received large blades. Such structural changes in the heat removal system made it possible to increase the exchange of air passing through the laptop by 28%, which increased the cooling efficiency of heating parts.

The new Apple MacBook Pro is unsuitable for repair, but has a good cooling system
Significantly increased battery capacity, amounting to 99.8 Wh and surpassing any batteries ever installed in a MacBook. At the same time, the battery case became 0.8 mm thicker, while the body of the entire MacBook Pro with a 16-inch screen increased by 0.7 mm compared to the previous model.

The new Apple MacBook Pro is unsuitable for repair, but has a good cooling system

However, in addition to the advantages, the experts revealed a number of significant difficulties in disassembling, which led to an unsatisfactory final assessment of the laptop's maintainability: the model received only 1 point out of 10 possible, which translates it into a class of devices unsuitable for repair.

When analyzing the features of the stages of disassembling a laptop, iFixit specialists note only one positive point – it is quick and easy to remove to replace the trackpad. The good news ends here. The modular design is provided only for insignificant components, while the parts of the processor, RAM and flash memory are soldered to the board, and it is impossible to remove them to a layman. The keyboard, battery, speakers and Touch Bar are mounted either with rivets or with glue, which complicates their dismantling. The Touch ID sensor is a power switch for the laptop and is rigidly mounted on the motherboard, and this also reduces maintainability.

Source:. [TagsToTranslate] laptop

Lee Bryan

Lee Bryan

My name is Lee Bryan, and I took up programming in seventh grade on my own. At first, I used one or two books as references. Later, the books piled up. I studied computer engineering at Technical University of Berlin. There, I earned my degree. I gained many years of experience as a software developer in Berlin’s startup scene. During this time, I constantly read international reference books to keep up with the latest news and trends.

Das könnte dich auch interessieren …

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.